Throttle/pedal position sensor A circuit high input
The throttle or pedal position sensor A circuit input exceeds its calibrated limit. This is a high electrical signal, not proof that the pedal is fully pressed or the throttle is stuck open. Electronic throttle protection may reduce response, making the actual driving symptoms central to the safety decision.
Can I keep driving?
If accelerator response is unpredictable, acceleration is unintended, the engine stalls or power is insufficient for safe traffic movement, pull over safely and arrange a tow. Even without a current symptom, obtain a shop assessment before further driving; throttle response may change.
Flashing light, burning smell or smoke? Pull over safely. Danger to life: call 911.
What does this code mean for your car?
The same code can need different checks depending on the model and engine. Enter your vehicle details to find relevant sources and checks.
Symptoms
- Weak or unpredictable accelerator response
- Reduced-power mode or throttle warning
- Abnormal idle or stalling
Possible causes
- 1Sensor A signal wire short to power
- 2Open sensor ground or incorrect reference voltage
- 3Wear or failure in the relevant position sensor track
- 4Throttle mechanical trouble or assembly mismatch, depending on the vehicle
These possibilities are not ranked by frequency and do not diagnose your vehicle.
Checks you can safely do yourself
Safe checks only: engine off and cold, car on level ground.
- Save all codes and any freeze-frame data your scanner displays before clearing or repairs.
- With the vehicle parked and engine off, check that the floor mat does not touch the accelerator. Do not road-test the fault, move the throttle plate or dismantle the assembly.
When you need a shop
Have the shop identify the correct A track from the vehicle diagram, compare throttle and pedal signals, and test reference supply, ground and wiring. Mechanical inspection or throttle relearn should follow manufacturer procedures and cannot substitute for circuit diagnosis.
How much does it cost?
A US repair estimate needs a diagnosis and a local shop quote.
We do not have a verified US repair quote for this fault. Request 2-3 itemized estimates after diagnosis; vehicle, parts and labor determine the cost.
Get 2-3 quotes
Investigate this code for my carFAQ
Can I keep driving with P0123?
If accelerator response is unpredictable, acceleration is unintended, the engine stalls or power is insufficient for safe traffic movement, pull over safely and arrange a tow. Even without a current symptom, obtain a shop assessment before further driving; throttle response may change.
What can cause this code?
Possibilities include sensor A signal wire short to power; open sensor ground or incorrect reference voltage; wear or failure in the relevant position sensor track; throttle mechanical trouble or assembly mismatch, depending on the vehicle. The code does not rank causes or identify a part that must be replaced.
Does clearing the code fix the fault?
No. Clearing the code does not repair its cause or prove the fault is absent. It can erase diagnostic data and reset readiness monitors. Even if the code does not reappear immediately, the repair needs verification using the tests appropriate to the vehicle.
What if this code appears during a pre-purchase check?
Arrange an independent professional inspection before buying, including stored data, readiness status and written diagnostic findings. Have the shop identify the correct A track from the vehicle diagram, compare throttle and pedal signals, and test reference supply, ground and wiring. Mechanical inspection or throttle relearn should follow manufacturer procedures and cannot substitute for circuit diagnosis.
How much does repairing P0123 cost?
We do not have a verified US repair quote for this fault. Request 2-3 itemized estimates after diagnosis; vehicle, parts and labor determine the cost.